Powder Series (DCP)

convex
USHAFIRE Cartridge operated Dry Powder extinguishers are characterized by their high performance, simple method of operation and rapid fire knock down capability. They are suitable for tackling fires involving freely burning materials, petrol & oils, gas & electrical equipment. They are ideal for vehicle & marine risks. KANEX powder extinguishers contain high performance powder to achieve high Fire Rating.

FEATURES

  • Sodium -bi-carbonate based Dry Chemical agent capable of fighting class B, C & E fires as per IS 4308
  • Mono Ammonium Phosphate based dry chemical agent capable of fighting class A, B, C and E fires as per IS 14609 (on request)
  • BIS Approved ( IS 15683 )
  • CE Certified (On Request)
  • High quality pure polyester powder coating
  • Controlled discharge
  • Brass nickel plated head valve with simple squeeze operation
  • Easy & more economical to maintain & service
  • Rechargeable and easy to service
  • Choice of capacity from 1 to 9 Kg
  • High quality EPDM Rubber braided hose is far more flexible than the normal rubber used in hose pipe and also far less prone to cracks.
PERFORMANCE DATA
MODEL UFD 4 UFD 6 UFD 9
Capacity 4 kg. 6 kg. 9 kg.
Fire Rating 21B 34B 34B
Average discharge time 15.0 sec 21.0 sec 32.0 sec
Height without base (Approx.) 510 mm 540 mm 585 mm
Diameter (Approx) 140 mm ± 10 mm 150 mm ± 10 mm 180 mm ± 10 mm
Filled weight (Approx.) 7.3 Kg 10.3 Kg 15.3 Kg.
Empty weight (Approx) 3 Kg 4 Kg 6.3 Kg
Operating temperature -30°C to 55°C -30°C to 55°C -30°C to 55°C
Working Pressure at 20° C 15 bar 15 bar 15 bar
Maximum Service Pressure 18 bar 18 bar 18 bar
Test Pressure 35 bar 35 bar 35 bar
technical specification
As per IS Specification & Capacity : DCP, cap : 5kgs. & 10kgs. as per IS Spec: 2171 & higher cap. 25kgs. 50kgs. & 75kgs. as per IS Spec 10658
Approval : DCP 5kgs. & 10kgs. approved & certified by BIS with ISI mark.
Construction : Body CRCA Sheets, IS : 513
Cap : Brass forging
Anti- Corrosive treatment : Body Coated with epoxy powder coating / phosphatised.
Hydraulic test : Carried out at 30 kg/cm2 as per IS norms.
Charge : Dry Powder Sodium Bi-Carbonate base and Co2 gas cartridge is fixed with each extinguisher.
Finish : Post Office Red/Fire Red Epoxy polyester powder coated
Accessories : Wall mounting brackets. (Higher capacity are wheel mounted)
Maintenance : The fire extinguisher must be maintained as per IS :2190 for satisfactory performance.
Operation : Keep the KANEX extinguisher upright. Remove the safety clip & strike the knob. Direct discharge to fall on the base of the fire.
DCP EXTINGUISHERS ARE ALSO AVAILABLE IN SQUEEZE GRIP TYPE.

Enquiry New

Catalogue: